Danger is everywhere, pay attention to safety when loading and unloading
Feb 02, 2023
As we all know, the freight industry is a high-risk industry, in addition to transport, loading and unloading goods also hidden risks, especially some details, must be paid attention to.
The first thing you face when loading and unloading is parking, although this is a simple action, but in the enquiry truck loading and unloading accidents, you will find a lot of accidents caused by not pulling the handbrake or the handbrake is not pulled in place.
Some roads may seem flat, but in fact there is a certain slope, so if the handbrake is not applied, the vehicle will easily slip.
Therefore, whatever the situation, the driver should always pull the handbrake before leaving the cab. When stopping for a long time to load or unload, it is advisable to use a vehicle stopper, especially on sloping roads.
In addition, when parking, you should also pay attention to the surrounding situation, especially for cement mixers and truck-mounted cranes that need to be parked for operation, choose a flat and stable road base to park the vehicle, and always pay attention to the cargo box situation when unloading to prevent overturning.
Whatever the circumstances, whether loading or unloading or in transit, care must be taken, especially with regard to details such as regular checks of bale ropes, tarpaulins, etc. Handle with care when using them to avoid breakage.
When loading and unloading, be sure that there will be no other people around to suddenly break in and cause an accident. Always secure the doors of the lorry after they have been opened before unloading operations are carried out.
After the vehicle has been driven and parked for a long time, the temperature of the cooling water tank and exhaust pipe are generally high, so beware of being scalded when working in these areas.
Due to the special working conditions of lorries, there is a risk of oil, thin ice and mud on the vehicle and on the soles of the driver's shoes. Moreover, some vehicles have extra high and wide transport, and there is a greater risk of falling over and slipping when covering the tarpaulin.
The height of a lorry is usually 3 to 4 metres and a fall from a lorry can cause injury or even endanger your life. Therefore, when getting on and off must be careful, Hold Steady, do not be careless.
When loading and unloading goods, it is important to secure them well to avoid problems during transport, especially for special goods such as steel coils, steel pipes, glass, etc.
You also need to learn to drive with foresight during driving, control your speed, slow down in advance when you encounter downhill slopes, junctions and traffic jams, and avoid situations such as emergency braking and emergency direction adjustments to prevent goods from sliding off due to not being secured, or ramming into the cab causing accidents.
Both on the chassis and on the cargo box, there are sharp edges, protrusions, etc., which can easily be bruised by them during loading and unloading operations.
Before loading or unloading, secure the doors of the compartment. There have been numerous tragic accidents caused by collisions with other road participants when the doors were not closed properly, so check the locking mechanism more often after closing them.
When loading or unloading some special goods that require the cooperation of loaders, forklifts, cranes etc., it is best to stand in a safe area and not walk into the working area of other machinery.
Special cargo transport needs to pay more attention to safety, such as the transport of bulk commodities, transport of dangerous chemicals, car transport, etc.. As cargoes are special, there are more dangers involved. When loading and unloading cargoes, it is important to operate according to the regulations to prevent accidents caused by mishandling.
As a special industry, truck drivers take on many unknown risks, so it is important that drivers learn to protect themselves and others.






