Ford New Transit V362 ICU Ambulance
·Driver’s compartment
| FORD 2.0T Gasoline Engine With Ford 2.0T ECO BOOST gasoline engine, New Transit has obtained 10 Ward engines for two years in a row. It only needs to step on the accelerator to generate strong power of maximum horsepower of 202PS and maximum torque of 300NM, while the comprehensive fuel consumption is only 7.6L/100km. High-speed low fuel consumption, high cost performance. |
| Boron steel high strength body Bearing boron steel body, high strength galvanized sheet, effectively absorb the impact force caused by impact. Streamline appearance, can effectively guide the surrounding air flow, reduce air resistance and fuel consumption, help to improve the driving stability of the car and the cooling conditions of the engine, the body has good ventilation. |
| The best safe configuration of commercial vehicles The new fully standard ABS+EBD has all-round active and passive safety protection to control the driving wheel and follower wheel to ensure the stable and safe driving of the vehicle. And using Bosch 9.1 version of the body electronic stability system, for the highest version in China, slippery road better control driving safety, can achieve real-time monitoring, active intervention and prior warning, showing outstanding safety and security functions. |
| Car comfort integrated central console The NEW TRANSIT operating platform completely subverts the traditional commercial truck operating platform, car integrated design, four pairs of steering wheels, operating platform a variety of storage space, medium replacement bar, equipped with USB radio audio system, concise and generous, fashion and refreshing. In the transmission system, the matching is a 5-speed manual transmission 5 SPD VCT75. |
·Driver’s compartment
I. Vehicle Specification:
Make: FORD Motors
Model Code: XLG5031XJH6
Model Year: 2020
Body Type: Box
Transmission: MT 5-speed mechanical type
Displacement: 1997ml
Safety: ABS+EBD, Airbag for driver
Fuel Type: Gasoline
Overall Dimension: L：5341 W：2032 H：2510,2495,2450
Wheelbase: 3300mm
Gross Vehicle Weight: 3300kg
Tire Size: 215/75R16C
Fuel Tank: 100L
Steering: Left Hand Drive/ Right Hand Drive
II.Ambulance Conversion Specifications:
Air conditioning and heating system
1. Vehicle-mounted original air conditioner in driver's cab
2. Vehicle-mounted original air conditioner in Patient's compartment
3. Heater mounted in Patient's compartment
Emergency Alarm System
1. Long strips of ultra-thin Blue flashing alarm LED lamps in the front of vehicle outside roof
2. Beeper with 100W speaker can adjust the volume. working current ≤10A, output resistance ≤8Ω.working environment -40°——+50°
3. Alarm, warning light, Intercom double control handle (supported USB,TF function,MP3 audio file can be used. the external and internal talkback functions of the cab and the medical cabin can be supported)mounted at driver’s cab and patient cab
4. One blue flashing light at the left and right side of the vehicle，white light at both side of the vehicle’s back
5. The rear tail of the roof is equipped with a molded fiberglass rear tail, which can effectively guide the wind resistance and increase the stability of the vehicle at high speed. Four LED blue flashing lights and one LED white field lighting lamp are installed on the rear tail of the roof
Power Supply and Lighting System
1. 1000W Sine wave inverter
2. 100AH backup battery(When the parking power is not available, it can be used for 1.2h for 1000W electric equipment)
3. 15m mobile cables
4. IP6 waterproof power outlet on the left side of bodywork
5. 12V intelligent charger mounted in patient’s compartment, easy to be operated by doctors
6. 220V AC charge mounted in patient’s compartment, easy to be operated by doctors
7. 12V delay Ultraviolet radiation disinfector light
8. 220V AC power socket in driver’s compartment
9. Courtesy lamp at the back door(Rear lamp, can be used when the stretcher up to the vehicle at night time)
10. LED illumination light mounted at the top of Patient's compartment, can be adjusted the brightness of the patient’s compartment according to the patient’s condition.
11. Multi-functional control panel(Centralized control of the modified circuit system, can directly display the number of battery voltage, intuitive and convenient operation. Improve the safety of the whole circuit system, maintenance, replacement insurance is convenient and fast, easy to operate)
Patient's compartment
1. Patient’s compartment high-molecular environment-protection flame-retardant material interior top
2. The side wall of patient’s compartment of vehicle is decorated with polymer, environmental protection and flame retardant material
3. Window frame, middle door, tail door white polymer environmental protection flame retardant interior decoration
4. Patient’s compartment floor with imported medical LG acid, alkali, fire, anti-skid, anti-static blue or red floor leather
5. Perimeter embossing edge wrapping of Patient's compartment , dust-proof, anti-skidding, washable
6. Compartment wall with PVC panel between driver's cab and Patient's compartment, a tempered glass window in wall to make observation (push-pull window)
7. Two-way ventilation fan mounted in the interior roof of Patient's compartment. Ensure the patient’s cab indoor and outdoor air exchange
8. A foldable doctor seat covered with red(or blue)leather, mounted to floor near to compartment wall
9. Patient’s compartment left front medicine storage cabinet (using high-molecular environment-friendly material, convenient for small medicine bottle to be stored)
10.Three drawer cabinets behind the partition wall, with 3 round drawers holding hands
11. Install a set of item storage cabinets behind the partition wall of the patient’s compartment
12. Oxygen cylinder fixing cabinet is installed at the left wheel hub of the patient’s compartment
13. Medical cabin left oxygen cabinet in front of polymer environmental protection flame retardant material medical device cabinet (table edge 3cm edge, upper acrylic push-pull window).Arrangement reasonable, It is convenient for medical personnel to access the necessary medicines, simple medical devices and other necessary first-aid medical facilities, and is stable and reliable
14. Installation of push-pull window hanging cabinets at the top of the left
15. 2 sets German standard oxygen terminal and power socket mounted on the left side window roof of the patient compartment
16. Oxygen bottle (10L) ,mounted in left side of vehicle, Oxygen flow and pressure controller, the arrangement of oxygen pipeline is reasonable, and the control device is convenient for medical personnel to operate and monitor
17. Special oxygen suction (humidification) device
18. Two-person high-molecular environment-friendly material cabinet-type bed with safety belt is installed on the right side of the medical cabin, and the surface of the seat cushion and the backrest is coated with leather
19. Installation of safe handrail in cabinet bed
20. Sliding infusion bottle holder at the top of the medical cabin is reliable, easy to operate, reliable and clamped, and the bottle will not shake while driving
21. Antibacterial safety handrails are installed on the top of the patient’s compartment
22. Auto-loading stretcher mounted in patient’s compartment(The main body adopt to the high-quality aluminum alloy materials. the backrest is supported by an adjusting structure, the backrest can be adjusted in the range of 60 degrees, a patient is provided with a safety belt, the fixing between the patient and the stretcher is facilitated, and the special fixing device for the ambulance is safe and reliable)
23. Stainless steel guard plate at the bottom of the stretcher (optional Loading stretcher platform)
24. Scoop stretcher(By using the separated structure, the length of the stretcher can be adjusted at will according to the body length of the patient. A hinged clutch device can be arranged in the middle of the two ends of the stretcher, which can separate the stretcher into left and right parts. Without moving the patient, the patient can be quickly placed in the stretcher and transported to the hospital bed or operating table.)
25. Stainless steel dirt bucket
26. back-bar guard
27. Fire extinguisher, can be removed from the holder easily
28. Black glass-film on the left side of Patient's compartment, and 2/3 frosted film on the right side
29. Customize the red / blue reflective belt of the body waist according to the needs of the customer, in accordance with the national regulations
III.Optional Medical Equipment:
1. First Aid Bag
made of corduroy waterproof fabric, lightweight, heavy duty,
resistant and washable , extra visibility with reflector strips on the sides. Spacious to fit other needed items such as medications, etc.
2.Patient Monitor
A.True and professional pacemaker acquisition channel, 50k sample rate, recording of pacemaking impulse, assistant diagnosis of pacemaker working performance.
B.One size AAA battery can record more than 48 hours continuously.
C.The standard configuration is 4G storage capacity, supporting 32G.
D.File record formats can be copied directly.
E.Multilanguage switchover.
3.Aluminum Alloy Foldaway Stretcher
This stretcher with wheels, outriggers and can be folded. It is made of high strength aluminum alloy and the water-tightness leather material. The back of this stretcher can be lifted, and the maximum angle is 60°. It is characterized by its being fashionable structure, light-weighted, easy-carried, use-safely, reliable quality and easy for sterilization. It is commonly used in hospital, gymnasium, ambulance, army hospital to carry the patients and the wounded.
Warm prompt: more equipment could be optional, please contact our sales manager to get more information.
Hot Tags: ford new transit v362 icu ambulance, China, suppliers, manufacturers, price, for sale, made in China
Send Inquiry
